User manual

Imagestore HDTV User Manual Audio Mix Files
Miranda Technologies Ltd Page 175
OutputMix
OutputMix <Destination>
Maps the AddToMix inputs of the current mix to the specified output
(destination).
This command must be used after the last AddToMix commands for the
current mix and before EndMix.
EndMix
Ends the current mix.
This command can only be used after StartMix.
Simple mix structure
This example show the mix structure needed to create a stereo data path.
# Creates a stereo data path using AES input 1 as A,
# AES input 2 as B and AES output 1 as the result.
StartMix "DataPathL"
AddToMix AES_I_P1_L A_DATA_XP
AddToMix AES_I_P2_L B_DATA_XP
OutputMix AES_O_P1_L
EndMix
StartMix "DataPathR"
AddToMix AES_I_P1_R A_DATA_XP
AddToMix AES_I_P2_R B_DATA_XP
OutputMix AES_O_P1_R
EndMix
Input Bunches
AddToMix <Source> <GainType> <InputProfile> <MixDown>
To provide better management of multi-channel inputs, the concept of Input
Bunches has been introduced. The rationale for this is to use Automation
Commands and the User interface that already exist for finite audio