User manual

Front Panel Operations Imagestore HDTV User Manual
Page 142 Miranda Technologies Ltd
Network Mask
This option displays the unit’s Network Mask (sub-net mask) number and
enables the user to modify it.
The Network Mask number will be shown on the VFD display with a plus (+)
and minus (-) symbol at either end indicating that the value can be adjusted
between (0 and 255).
The number is in four blocks separated by full stops i.e.
- >255<255.0.0 +
The mask number is set for Class B addresses and should only modified in
consultation with your IT department.
To adjust the number, refer to the IP Address section (see above).
Pressing the enter key to accept the change will then display the message
‘Updating EEPROM’ shortly followed by ‘Please Restart For New
Network Mask’.
Restart the Imagestore HDTV.
Gateway Address
This option displays the unit’s Gateway Address and enables the user to
modify it.
The Gateway Address will be shown on the VFD display with a plus (+) and
minus (-) symbol at either end indicating that the value can be adjusted
between (0 and 255).
The number is in four blocks separated by full stops i.e.
- >255<255.255.255 +