User manual

Imagestore HDTV User Manual Overview
Miranda Technologies Ltd Page 141
around each character in turn indicating that each character can be adjusted as
required.
Use the arrow control keys ⊳  to increase or decrease the value of the first
character. Pressing the enter key will accept the new value and index to the
second character. Repeat the process until the all characters have been
modified.
Pressing the enter key to accept the change will then display the message
‘New setting takes effect on restart’.
Restart the Imagestore HDTV.
IP Address
This option displays the unit’s IP Address number and enables the user to
modify it. The IP Address will be shown on the VFD display with a plus (+)
and minus (-) symbol at either end indicating that the value can be adjusted
between (0 and 255).
The number is in four blocks separated by full stops i.e.
10.96.98.240
Use the arrow control keys ⊳  to increase or decrease the value of the first
block (10). Pressing the enter key will accept the new value and index to the
second block (96). Repeat the process until the all blocks have been
modified.
Pressing the enter key to accept the change will then display the message
‘Updating EEPROM’ shortly followed by ‘Please Restart For New IP
Address’.
Restart the Imagestore HDTV.