User manual

Front Panel Operations Imagestore HDTV User Manual
Page 118 Miranda Technologies Ltd
Enable Control
Select 1 to enable the fader or 0 to disable it.
Invert Control
Select 1 to invert the mode of the fader or 0 to disable it
Enable Pickup
Select 1 to enable pickup or 0 to disable it.
Control and Pickup are used to determine how the fader will operate if re-
enabled. If both are disabled and the fader adjusted, when Control is enabled
the fader position is read resulting in a jump to that position.
If Pickup is enabled and the fader adjusted, when Control is enabled the fader
will only become active when the value at which the fader was deselected is
reached.
Show Fader Inputs
This option displays the amount of fader being used from 0% - 100%. It is
also represented as a bar graph on the VFD.