User manual

Front Panel Operations Imagestore HDTV User Manual
Page 100 Miranda Technologies Ltd
Create a GPI Macro
To create a macro, display the relevant GPI then press the enter key. If the
GPI is unused >empty< will be displayed on the front panel.
Pressing the enter key again to gain access to the entire Imagestore
HDTV Operate menu.
Using the arrow keys ⊳  display the first command to be added to the
macro and press enter to add it. The display is now returned to the listing of
the macro, showing the added command. To add a second command, use the
arrow keys ⊳  to display the next command and press the enter key as
before. Further commands are added to the macro using the same procedure.
Approximately 200 command lines may be added to the macro.
GPI Macro Command list
Set Inputs
1/A
Pass SDI
Force Colour Field
2/B
Pass SDI
Force Colour Field
3/Fill-1
Pass SDI
Force Colour Field
4/Key-1
Pass SDI
Force Colour Field
5/Fill-2
Pass SDI
Force Colour Field
6/Key-2
Pass SDI
Force Colour Field