User manual

Front Panel Operations Imagestore 750 User Manual
Page 68 Miranda Technologies Inc.
V-Fade Colour
This option determines the colour used when performing a V-Fade transition.
The colour is set by adjusting the RGB (Red, Green, Blue) values, from 0%
to 100%, for each colour in turn. Using the joystick arrows ⊳ , increase or
decrease the field value then, when the desired value is reached press enter.
After adjusting the Red value the Green field will be displayed then the Blue.
Pressing enter after adjusting the Blue value will accept the change. To go
back a level press escape.
Standard Colours
Colour Red (%) Green (%) Blue (%)
White 100 100 100
Yellow 100 100 0
Cyan 0 100 100
Green 0 100 0
Magenta 100 0 100
Red 100 0 0
Blue 0 0 100
Black 0 0 0
Note: The default colour is black.
Set Cut Mode
This option allows the user to determine exactly when cuts and fades
commence within a frame. This allows the cut/fade behaviour of the
Imagestore to be synchronised with external automation. The options are as
follows:
• Cuts/fades occur on any field
• Cuts/fades occur on field 1 (default)
• Cuts/fades occur on field 2