User manual

Audio Mix Files Imagestore 750 User Manual
Page 222 Miranda Technologies Inc.
StartMix
StartMix “<MixName>”
Creates a new mix with the name MixName.
The name can be up to 256 characters.
Sources added to this mix will be accumulated.
This command can only be used as the first command or immediately after
EndMix.
AddToMix
AddToMix <Source> <GainType>
Adds to the mix a named source with the specified gain type.
This command can only be used after StartMix and before EndMix.
SetOutputGain
OutputMix <Destination> <GainType>
Sets the gain type of Destination to be GainType.
This command must be used after the last AddToMix commands for the
current mix and before EndMix.
OutputMix
OutputMix <Destination>
Maps the AddToMix inputs of the current mix to the specified output
(destination).
This command must be used after the last AddToMix commands for the
current mix and before EndMix.
EndMix
Ends the current mix.
This command can only be used after StartMix.