User manual

AB Mixer Imagestore User Manual
Page 98 Miranda Technologies Ltd
Fade A/B
Fade A/B will fade between the A input and B input going on air. The type of
fade is dependant on the transition type set, see transition types in the next
section.
Select manual/operate/AB Mixer/fade A/B from the boot-up menu to locate
the feature.
Press the enter key to action a fade between the A and B source. When the
operation is complete an A or a B symbol will appear on the top line of the
VFD display depending on the active source. During the transition the
intermediate state symbol – is displayed acknowledging the fade is taking
place. No other change can be detected on the VFD display, which remains
showing the same menu selection for further fade A/B operations.
Transition Type
This option allow the user to select the following range of transition types:
♦ Cut
♦ X-fade
♦ V-fade
♦ Wipe L to R
♦ Wipe R to L
♦ Wipe T to B
♦ Wipe B to T