User manual

Oxtel RCP Operation Imagestore User Manual
Page 92 Miranda Technologies Ltd
The above display provides a list of three status conditions, "Panel",
"Current" and "New". "Panel" reveals the identity of the RCP. "Current"
indicates which slave device the RCP is currently connected to and "New"
shows the current selection for a new slave to connect to.
Panel
More than one remote control panel may be attached to a single Intelligent
Panel Router (IPR). The IPR allocates each Oxtel RCP with an identifying
name. In the example above the identifier is comprised of a number, "RCP1"
and a given name "Prep Area".
Current
The "Current" field shows the unique number and given name for the channel
currently connected to the RCP. In the example above the channel number
shown is "200" and the given name is "Imagestore 2".
New
The "New" display shows the unique number and given name for the channel
that will become selected when a channel change is applied. In the example
above the channel number shown is "300" and the given name is "Imagestore
3".