User manual

Imagestore User Manual Oxtel RCP Operation
Miranda Technologies Ltd Page 91
Set-Up
With the exception of "Preview", the parameters of "Setup" are common
irrespective of configuration mode or layer. The descriptions given for Swap-
Preview mode are also applicable for both the MG and FG layers of Cascade
mode.
In Cascade mode, the preview output from an Imagestore can be configured
to monitor the video signal at ten sample points around the internal circuitry.
This facility is useful for determining the precise state of the internal stores.
The preview sample points are given overleaf.
Programme Output Midground Fill
Programme Preview Midground Key
Background Midground
Foreground Fill Fill
Foreground Key
Presmaster PVW
Key
Pressing the 'SETUP' button followed by the soft key beneath the "Preview"
prompt displays the current setting. Pressing the left or right soft key
increments the "Preview" setting through its options and the settings are
applied immediately in real time.
Connecting through an IPR
The Intelligent Panel Router (IPR) enables an individual RCP to connect to a
predefined set of slave devices on the system under the RCP user’s control.
The remote control panel achieves channel selection using a special display
that can only be accessed when a connection is made between the RCP and
IPR.
Channel Set Display
Pressing the "CHAN'L SET" key reveals the "Channel Set" display.