User manual

Imagestore User Manual Oxtel RCP Operation
Miranda Technologies Ltd Page 89
Selecting Transition Speed
Each time the "Rate" button is pressed the rate selection will step through its
options. The currently selected option is indicated by which of the settings
("Slow", "Med" and "Fast") is illuminated. This determines the rate at which
the keyer logo/images will come to air when selected.
Cut/Fade Selection
When the "Cut/Fade" button is pressed the type of keyer transition toggles
between cut and fade. The current setting is shown illuminated above the
button. This determines the effect that is used to bring images to air.
Loading Images to Foreground and Midground
Once the "MG KEYER" or "FG KEYER" button has been selected the
procedure for loading images is identical and the following description is
equally valid for both.
Press the appropriate keyer button ("FG KEYER" for foreground or "MG
KEYER" for midground). Press the "LOAD" button to display the "Load
Image" menu that provides access to two types of image loading; library
image or "live" from the "Fill" and "Key" ports.
Load from the Image Library
In order to load an image from the Imagestore library the image to be loaded
must be identified. Locating an image for loading can be achieved using the