User manual

Imagestore User Manual Oxtel RCP Operation
Miranda Technologies Ltd Page 87
keys. Using these keys it is possible to carry out any front panel operation or
configuration. When complete, press the "ESC" key to exit the display.
Alpha/Numeric Keypad
From within the "Set LCD and Keys" menu, pressing the right-hand soft key
toggles the keypad between alphabetic and numeric modes.
In numeric mode pressing a keypad button will produce a number at the
current cursor position and advance the cursor to the next entry position.
Subsequent presses of that same button would produce repeats of that
sequence.
In alpha mode, pressing a keypad button will produce a number at the current
cursor position but the cursor does not advance. A subsequent press of the
same button changes the entry to the first alphabetic character associated with
that key. Further button presses cycle the entry through its options without
advancing the cursor. When the desired character is displayed, pressing a
subsequent button will advance the cursor. If the same button is to be used
for the following character then press the "NEXT" button to advance the
cursor. Press the ENTER button to conclude the entry.
Transition Rates
Within the "Set-Up" menu, the keyer fade rate and the FTB fade rate may be
set by pressing the soft key beneath the "Rate" prompt. Use the appropriate
soft key to select between setting up the keyer fade (Transition) and program
FTB. "Transition" allows the setting of the number of fields for the preset
"slow", "medium" and "fast" fades for the keyers. FTB rate is a single setting
in fields.
Preview Output Set
To set the preview output to monitor a different sample point within
Imagestore, press the soft key beneath the "Preview" prompt.
The left- and right-hand soft-keys are now used to step through the on screen
options and changes are immediately effective. For normal usage the preview
output must be left set to "Program Preview".