User manual

Oxtel RCP Operation Imagestore User Manual
Page 84 Miranda Technologies Ltd
Clip, Gain and Transparency
Press the soft key beneath the "CGT" on-screen prompt and the "Edit CGT"
display will appear. The "Clip", "Gain" and "Transparency" settings may now
be adjusted using the rotary controls positioned above the appropriate on-
screen prompt. Numeric displays directly underneath the display prompts
indicate the current settings.
Polyphoto
In order to use the polyphoto features the "Edit Pack" option must have been
installed and a monitor must be connected to the PVW (preview) output. The
preview output may either provide a digital or analogue output signal and the
monitor attached must be appropriate. The polyphoto feature may only be
used when the Imagestore is configured in Swap-Preview mode. The feature
is not available in Cascade mode. The feature may only be selected and
controlled using an Oxtel RCP remote controller.
On the RCP press the ESC button repeatedly to ensure that the ESC button
illumination is extinguished.
To view the polyphoto display press the POLY button on the RCP and the
display will appear on the preview monitor. Adjusting the options presented
after pressing the SETUP button can change the polyphoto layout and
background (see the SETUP description).
A red dot appearing on an image indicates that this image is currently loaded
in the PGM channel. The polyphoto cursor is represented by a flashing
yellow dot on screen and the four illuminated keypad buttons on the RCP
may be used to navigate this cursor through the polyphoto display.
When the cursor is indicating an image or animation that is to be loaded into
the preview keyer, press the ENTER button on the RCP to load that image
and exit the polyphoto mode. To exit without making any changes simply
press the ESC button.
Add to Current Playlist
Files identified under the load procedure may be added or appended to the
current playlist by selecting the soft key above the "Playput" prompt.