User manual

Oxtel RCP Operation Imagestore User Manual
Page 82 Miranda Technologies Ltd
confirm the erase by pressing the "Yes" soft key. The display will indicate
that the file has been erased. Press "ESC" to return to the earlier menu.
Editing Images
Pressing the 'EDIT' button brings the edit display to screen. "Edit" provides
the capability of adjusting the position and key parameters, the image mask,
the clip/gain/transparency and, when Imagestore is fitted with the Edit Pack"
option, a selection of image clean up options.
Editing Position or Key
Press the appropriate soft key beneath the Key/Posn on-screen prompt and
the Edit Position display will appear. The horizontal and vertical position of
the image may now be adjusted using the rotary controls positioned above the
on-screen Horiz and Vert prompts. A numeric display directly underneath the
positional prompts indicates the settings so that normal settings may be
swiftly repeated.
With the Edit Position menu displayed, the left-hand soft key may now be
used to select the Set Key Type menu. There are three key settings that may
be changed, Sense, Source and Type. The three settings appear on the display
beneath the three rotary controls. Turning the Sense rotary control clockwise
will select "Normal" and counter-clockwise will select "Invert". The Source
control tuned clockwise will select Separate and anti-clockwise will select
Self. The Type control selects "Full" (clockwise) and "Linear" (anti-
clockwise).