User manual

Oxtel RCP Operation Imagestore User Manual
Page 78 Miranda Technologies Ltd
Program Image "On Air/Off Air"
When taking a foreground image "on-air" or off-air", the condition of the
SWAP button is crucial. Ensure that the legend marked SWAP above the
swap button is extinguished. If it is illuminated, press the SWAP button to
extinguish the legend. With the SWAP legend extinguished, pressing the
TAKE button takes the foreground image "on air" over the background.
When the foreground image is "on air", pressing the TAKE button will
remove it "off air".
Exchanging Program and Preview Images
When exchanging the contents the Program and Preview Images stores, the
condition of the SWAP button is crucial. Ensure that the legend marked
SWAP above the swap button is illuminated. If it is not illuminated, press the
SWAP button to illuminate the legend. With the SWAP legend illuminated,
pressing the TAKE button exchanges the Program and Preview images.
Selecting Transition Speed
Each time the "Rate" button is pressed the rate selection will step through its
options. The currently selected option is indicated by which of the settings
("Slow", "Med" and "Fast") is illuminated. This determines the rate at which
the images will come to air when selected. The actual transition rate values
may be preset (in fields) using the "Set-Up" menu.
Cut or Fade Selection
When the "Cut/Fade" button is pressed, the type of keyer transition toggles
between cut and fade. The current setting is shown illuminated above the
button.