User manual

Oxtel RCP Operation Imagestore User Manual
Page 76 Miranda Technologies Ltd
Cut/Fade
The "CUT/FADE" key is used to toggle between the two options controlling
the type of transition to and from air of the programme keyer. The current
selection is indicated by the illumination of the legend above the button. This
setting only affects keyer fade transitions and does not affect the programme
"fade to black" transition or the keyer "cut" transition.
Rate
The "RATE" key is used to switch between the speed options for keyer fade
transitions. The current selection is indicated by the illumination of the
legend above the button and only the option currently selected is illuminated.
Rates are set using the "Set-Up" feature.
FG Keyer and MG Keyer
These two keys are only effective when the RCP is connected to an
Imagestore that is operating in the "Cascade" mode. FG is an abbreviation of
foreground and MG is an abbreviation of midground. The keys are used to
determine the keyer affected by current operations.
Channel Set
The "CHAN'L SET" key is only effective when the RCP is used via an
Miranda Technologies Ltd Intelligent Panel Router. Pressing the "CHAN'L
SET" key will provide access to the "Channel Set" menu.
Soft-Keys
The remote control panel features four soft-keys which are positioned from
left to right under the LCD. These keys have no dedicated purpose and are
allocated by the different menus as is appropriate for a particular purpose.
When a purpose is to be allocated to any soft key a legend will appear on the
LCD directly above the key indicating its temporary purpose.
Rotary Controls
The remote control panel features three rotary controls which are positioned
from left to right above the LCD. These "pots" have no dedicated purpose
and are allocated by the different menus as is appropriate for a particular