User manual

Imagestore User Manual Oxtel RCP Operation
Miranda Technologies Ltd Page 75
pressing the "FADE TO BLACK" key fail to result in the button illuminating
or the programme output fading, wait to see if a long fade rate has been set
before concluding that this feature has been disabled.
Previous (Prev)
When a play-list is not loaded, and an image is being monitored at the PVW
output, pressing "PREV" (previous) will load the preview keyer with the
preceding image from the image library. In play-list mode the image loaded
will be the preceding image in the play-list.
In polyphoto mode the "PREV" key will move the cursor (flashing yellow
dot) to the previous thumbnail image.
Next
When a play-list is not loaded, and an image is being monitored at the PVW
output, pressing "NEXT" will load the preview keyer with the following
image from the image library. In play-list mode the image loaded will be the
following image in the play-list.
In polyphoto mode the "NEXT" key will move the cursor (flashing yellow
dot) to the following thumbnail image.
Take and Swap
The “TAKE” light is lit when the image selected on the programme output is
“on-air”. The light is out when the programme image is cut or faded down.
The "TAKE" key can be used to take logos/images to and from air over the
background signal or to exchange the contents of the preview and programme
keyers. The effect of this key depends on the status of the "SWAP" key.
Pressing the "SWAP" key selects and deselects the swap condition and
determines the action of the "TAKE" button and the illumination of the swap
legend is toggled.
With the swap legend illuminated the "TAKE" button exchanges the
logo/image on air with the preview logo/image using the selected cut or fade
effect. With the swap legend not illuminated successively pressing the
"TAKE" button simply takes the programme logo/image on and off air.