User manual

Oxtel RCP Operation Imagestore User Manual
Page 74 Miranda Technologies Ltd
Setup
The SETUP key provides access to provision for setting the LCD
parameters, accessing the polyphoto display, setting fade transition rates and
for configuring the sampling point of the controlled equipment preview
output.
Next Del
The NEXT DEL key is used to delete characters of names that have been
entered on the alpha numeric keypad. For example, if a file were to be named
"MIRANDA" and was incorrectly entered as "MIRANAD", the NEXT DEL
key could be used to delete the final "D" and "A" allowing a correction to be
made.
Alphanumeric Keypad
The alphanumeric keypad comprises keys "0" to "9YZ_" and the ENTER
key. These keys are not normally illuminated and become illuminated only
when a procedure is selected which might require their use.
When using the keypad to enter a file name, use the set-up RCP feature to
select the buttons for "alpha" or "numeric" mode. Where "alpha" is selected,
press the key once for the first character, twice for the second alphabetic
character and so on.
When the appropriate character is displayed, pressing a different
alphanumeric key will automatically move the entry cursor. Where the same
key is to be re-used, move the cursor manually using the left-hand rotary
control.
If a keying error is made, pressing the "ESC" key will cancel the complete
entry and "NEXT DEL" key will delete the last character entered. When all
the appropriate characters have been entered pressing the ENTER key will
apply the entry.
Fade to Black
The operation of the "FADE TO BLACK" key differs from the other keys in
that its illumination is not intended as an indication of its availability. When
the "FADE TO BLACK" key is illuminated it indicates that a Fade to Black
status is in effect and that the output is currently faded to black. Should