User manual

Front Panel Operation Imagestore User Manual
Page 66 Miranda Technologies Ltd
The filenames of the original file forms are used to form the file name within
the image library so that "FRED.JPG" will be saved in Imagestore's library as
"FRED.OXT".
Images by name
From the Load Image menu use the arrow keys W X to step through the
HDD library files until the name of the image of interest is shown in line two
of the display. The files are shown in alphabetic order and the right and left
arrow keys W X move the filename forward and back respectively. Pressing
the enter key will cause the displayed file to load from the library.
Image Load Mode
This option defines how an image is loaded into the midground or foreground
store. Select set-up/image load mode from the boot-up menu then press enter.
Using the left and right arrow keys W X select one of the following options,
pressing the enter key to accept the choice
Wipe Load
As the image/animation is loaded into the midground or foreground store it is
also displayed via the appropriate output. Larger files may be displayed
gradually until the image is complete.
Note: Animations loaded this way will be displayed frame by frame until
the entire sequence is loaded.
Clean Load
Clean load removes the existing image from the midground or foreground
store before loading the new file. The image/animation will NOT be
displayed until it is fully loaded.
Cut Load
Cut load is similar to clean load but the existing image remains active until
the new file is loaded. A cut transition then replaces the new image for the
old one.