User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 63
Cut Up/Down and Fade UP/Down
The cut up/down and fade up/down features affect the MG or FG image that
is present at the programme output. "cut up" and "fade up" take the MG or
FG image "on-air" over a background using a cut or fade transition. "cut
down" and "fade down" take the MG or FG image "off-air" from a
background using a cut or fade transition.
To find the cut up/down and fade up/down features from the "boot-up" menu,
select manual/operate and then choose either midground or foreground from
the Cascade Operate menu. Use the arrow keys W X to locate the cut-
up/down and fade up/down features.
Press the enter key to action a cut (fade) up, or a cut (fade) down. When the
operation takes place the arrow symbol will change from ↑ (cut fade up) to ↓
(cut fade down). No other changes can be detected on the VFD display,
which remains showing the same menu selection for further cut (fade)
up/down operations.
Switching Fade to Black On and Off
The FTB on/off feature causes the appropriate keying layer output on-air to
fade to full-screen black. When the output is already faded to black, selection
causes the same layer output on-air to fade from a full-screen black image to
the previously displayed image. The replacement rate is determined by the
setting under transition rates.
Select manual/operate/midground or foreground/FTB on/off from the boot-
up menu to locate the feature.