User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 53
If an image is being saved to floppy disk, two disks may be required. If the
image is large, one disk is used to save the Fill store and, if insufficient space
remains on the disk, a second disk is used to save the Key.
Animations and clocks cannot currently be saved to floppy disk. Images are
saved in the Miranda Technologies Ltd format (.OXT).
When the process has started, the display provides full dialogue and prompts
for floppy disk changes. Upon completion of the process, the display returns
to the Save Image menu.
Grabbing Images
The Grab Image feature enables the user to load the preview store directly
from the external "SDI Fill" and "SDI Key" inputs. Once loaded, the image
can be edited and stored, or used immediately without change.
Select manual/operate/preview/grab image from the boot-up menu to locate
the feature.
Press the enter key and Imagestore will display the SDI "Fill" input at the
"Preview" output and the display will change to show the following prompt.
When the enter key is pressed, Imagestore will grab the image at the instant
of the key being pressed and the display will change to show the following
prompt.