User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 51
Library Images
From the Load Image menu use the arrow keys W X to step through the
library images until the name of the image of interest is shown in line two of
the display. The files are shown in alphabetic order and the right and left
arrow keys W X move the filename forward and back respectively. Pressing
the enter key will cause the displayed file to load from the library.
Image Load Mode
This option defines how an image is loaded into the preview store.
Select set-up/image load mode from the boot-up menu then press enter.
Using the left and right arrow keys W X select one of the following options,
pressing the enter key to accept the choice
Wipe Load
As the image/animation is loaded into the preview store it is also displayed
via the preview output. Larger files may be displayed gradually until the
image is complete. Animations will be displayed frame by frame until the
entire sequence is loaded.
Clean Load
Clean load removes the existing image from the preview store before loading
the new file. The image/animation will NOT be displayed until it is fully
loaded.
Cut Load
Cut load is similar to clean load but the existing image remains active until
the new file is loaded. A cut transition then replaces the new image for the
old one.