User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 47
Fade Transition Rates
The number of frames that it takes for a keyer fade or a fade to black
operation to complete is controlled by the setting of a transition rate for each
type of operation.
Select manual/operate/programme/FTB on/off from the boot-up menu to
locate the feature.
When transition rates is selected and applied, two further options become
available from the Adjust Rates menu:
♦ the Fade rate
♦ the Fade-to-Black (FTB) rate
Select the appropriate option using the arrow keys W X and apply the
selection using the enter key.
The current setting will be shown and pressing the escape key will exit the
set-up leaving the value unchanged. To change the current setting, use the left
and right arrow keys W X to adjust the appropriate frame rate up or down.
Pressing the enter key will apply the new setting.