User manual

Front Panel Operation Imagestore User Manual
Page 46 Miranda Technologies Ltd
Fade to Black On/Off
The FTB on/off feature causes the current programme output on air to fade to
full-screen black. When the output is already faded to black, selection causes
the programme output on air to fade from a full-screen black image to the
previously displayed image. The replacement rate is determined by the
setting under transition rates (see below).
Select manual/operate/programme/FTB on/off from the boot-up menu to
locate the feature.
Press the enter key to action a FTB on/off. When FTB is on the B symbol
will appear next to the up arrow ↑. When FTB is off no B symbol is
displayed. During the FTB transition the intermediate state symbol – appears
next to the arrow acknowledging FTB is taking place. No other changes can
be detected on the VFD display, which remains showing the same menu for
further FTB on/off operations.