User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 45
Select manual/operate/programme/cut up/down from the boot-up menu to
locate the feature.
Press the enter key to action a cut down, or a cut up. When the operation
takes place the arrow symbol will change from ↑ (cut up) to ↓ (cut down).
No other changes can be detected on the VFD display, which remains
showing the same menu selection for further cut up/down operations.
Fade Up/Down
The fade up/down feature causes the current image to be faded from air and,
when there is no on air image, a subsequent command will fade the image to
air.
Select manual/operate/programme/fade up/down from the boot-up menu to
locate the feature.
Press the enter key to action a fade up or a fade down. When the operation
takes place the arrow symbol will change from ↑ (fade up) to ↓ (fade down).
During the transition the arrow is replaced by the intermediate state symbol –
acknowledging the fade is taking place. No other change can be detected on
the VFD display, which remains showing the same menu selection for further
fade up/down operations.