User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 43
Swap/Preview Mode (IS2 - Solo)
Program Operations
Five programme channel operations and an associated set-up are accessed via
the Swap PVW-Programme menu. From the boot-up menu select
manual/operate/programme. Use the arrow keys W X to step through the
options.
{manual} set-up
operate >
programme >
cut-swap fade swap cut up-down fade up/down FTB on/off
transition
rates
Cut Swapping Images
The cut swap feature causes the image loaded on the programme channel to
be exchanged with the image from the preview channel. The action is
instantaneous.
Select manual/operate/programme/cut swap from the boot-up menu to locate
the feature.
Press the enter key to action a cut-swap. When the operation takes place, the
arrow may change from ↓ to ↑ otherwise no change can be detected on the