User manual

Front Panel Operation Imagestore User Manual
Page 42 Miranda Technologies Ltd
Operating Modes
The operation of Imagestore is dependent on its operating mode
configuration. Features available in one mode may not be relevant in the
alternate mode. The modes are identified as Swap-Preview (IS2 and Solo)
and Cascade (IS2 only). Changing Imagestore's mode is described in the Set
Up section of this manual.
To check the mode of Imagestore, select manual/operate from the boot-up
menu. With operate displayed, press the enter key. The first line of the
display will now indicate Imagestore's current mode by showing either Swap-
preview Operate or Cascade Operate.