User manual

Imagestore User Manual Front Panel Operation
Miranda Technologies Ltd Page 41
Using the left and right arrow keys W X the percentage value may be
changed. Pressing the enter key will apply that setting and bring up a similar
adjustment for the green colour field. Having set the percentage of green,
pressing the enter key will bring up a similar adjustment for the blue colour
field. Pressing the enter key from the blue field adjustment completes the set-
up and the menu is returned to the Input Signal Set menu.
Emergency to Air
Imagestore has an emergency image facility, which, in the event of a
background video failure, enables an operator to rapidly get a preset
emergency image to air. The emergency image is stored in the image library
under the name "V000.oxt" and it replaces any other foreground image that is
currently being displayed.
Having selected manual from the boot-up menu, use the arrow keys W X to
display the emergency to air option and select it by pressing the enter key.
Having selected emergency to air, confirm the intention by pressing the X
arrow key to select Yes then pressing the enter key. This action will fade
down any images that are currently on air before fading up the emergency
image.
Once in the Emergency to Air mode, Imagestore may be reset to its original
state by pressing the escape key as prompted.
As an alternative to using the front panel, the emergency image may be
brought to air using an external button. This is achieved by allocating the
emergency to air command to one of Imagestore's GPI inputs. The procedure
for allocating GPI commands is described in the installation and integration
section of this guide.