User manual

Front Panel Operation Imagestore User Manual
Page 38 Miranda Technologies Ltd
and right respectively. Using the appropriate arrow key will reveal those
options.
VFD tallies (mixer/keyer states)
To highlight the state of either the mixer or the keyer, additional symbols are
shown on the top line of the VFD display at the right hand edge. These
symbols represent:
A source A
B source B
- intermediate state, transition being processed.
↑ image keyed up (to air)
↓ image keyed down (from air)
B Fade to Black
Escape and Enter Keys
The escape key is used to proceed to a menu option closer to the boot-up
menu. Successive pressing of the key will bring the display to the start-up
menu. The enter key is used to accept the menu item currently shown as
selected by being enclosed in brackets.
Left and Right Arrow Keys (W X)
Left and right arrow keys W X may be used to cursor left and right
respectively along a displayed menu branch to select a function. When a
selection of parameters is offered, these keys may be used to select a
variable. Where a single value is displayed the left arrow key may be used to
reduce the displayed value and the right key may be used to increase it.
Common Mode Operations
Imagestore's top-level menu provides the option to choose either manual
(operations) or set-up (configuration). When manual is selected the Manual
Override menu is revealed. Sub-menus accessed through the operate option