User manual

Appendix 1 Imagestore User Manual
Page 210 Miranda Technologies Ltd
Power Requirements
Imagestore accepts power from a 110V or 220V, 60Hz or 50Hz, AC mains
supply. The mains supply input fuse is a T2A (2 Amp Anti-surge) and should
always be replaced with a fuse of the same rating.
Interfaces
The Imagestore employs five types of control and image interfaces and a
summary of these is given in the following table.
Interface Type Description
RS422/RS232
Ethernet
Panel
GPI's
Faders
Automation serial control interfaces.
Image Loading and Transfer (optional).
Serial Interface for Remote Control Panel.
Nine GPI's with input and output macro editor.
Seven analogue fader inputs.
Mechanical
The unit is contained within a 1RU chassis with the following mechanical
specification.
Height: 44mm (1.75")
Width: 482mm (19") with mounting ears, 442mm (16.75") without ears.
Depth: 444mm(17.55") with rear connectors, 423mm (16.75") without
connectors.
Weight: 7.0kg (15.4lbs)
Cooling Forced air via internal fans