User manual

Installation and Integration Imagestore User Manual
Page 200 Miranda Technologies Ltd
artefacts, especially when using small fonts. To counteract this effect a
selectable software ‘notch’ filter is now available consisting of:
off,
50%
100%.
Restart System
To re-boot the unit without removing the power (a warm re-boot), select
restart system from the System Set-up menu and press the ENTER key. Use
the arrow keys W X so that the brackets enclose the YES option and then
press enter again.
Clean Restart
The clean restart feature provides for the erasure of all configuration file
settings and returns Imagestore to the original factory settings. Video (and
audio) GPI settings and all image files are retained.
To clean restart the unit, select clean restart from the System Set-up menu
and press the enter key. Use the arrow keys W X so that the brackets enclose
the YES option and press enter again.
System Timing
This final part of the section describes the way in which signals applied to,
processed by and output from, Imagestore are synchronised. Propagation
delays through the unit are discussed and the method used to adjust and set
this particular type of delay is detailed.
To obtain the highest standard of performance from the Miranda
Technologies Ltd Imagestore it is highly recommended that the user be
acquainted with the concepts of synchronisation and timing. An
understanding of the timing relationships within the Miranda Technologies
Ltd Imagestore and the equipment with which it interfaces, enables the user
to determine the optimum timing of the overall system.