User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 199
Clock Offset
If Clock Offset is selected the setting is made sequentially as hours, minutes
and seconds. For each setting the arrow keys W X are used to increase and
decrease the value. The enter key applies each setting and moves to the next
setting in the sequence. The clock offset entered is added to the time-of-day
based clocks.
RCP Mirror
The RCP mirror function can be enabled or disabled. If enabled the front
panel commands of the Imagestore can be controlled and accessed from an
Oxtel RCP unit. To remotely control the Imagestore from an RCP select
Setup from the top line of buttons on the RCP then press the left hand button
underneath the LCD where ‘RCP’ is displayed. Next press the button
underneath the LCD where ‘Mirror’ is displayed. Button 2, 4, 6 and 8 will
now mimic the buttons on the front of the Imagestore.
Presmaster Setup
This option automatically configures the Imagestore for use within a
Presmaster environment with the following parameters being set:
Preview Output Set - Presmaster preview
A/B Mix – Audio Follow Video – A/B Mix -Off
A/B Mix – Audio Follow Video – Fade to Silence – Off
Audio Control – Model
Cascade mode
Serial Comms Setup – RS-422 – Baud rate – 57600
Aspect Ratio – 4x3
Midground – FTB on/off
Clear Squeeze
PAL Filter (Text Chroma Filter)
Easytext character generation has a frequency content which is too high to be
passed through a PAL encode/decode process without generating chroma