User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 195
System Settings
The system setting set-up facility provides for the re-configuration of major
system parameters. The same menu branch includes the system restart and
clean start options. To access the system set-up menu, select set-up/system
from the start-up menu.
Use the arrow keys W X to select YES and then press the enter key to display
the System Set-Up menu.
625/525 Lines
The 625/525 setting must be set to the appropriate TV standard where PAL =
625 line and NTSC = 525 line.
To check or change the setting select 625/525 line from the System Set-up
menu and press the enter key. The current setting will be shown enclosed by
brackets. To return to the "boot-up" menu, press the escape key repeatedly.
To change the setting, use the arrow keys to select the new setting and press
the enter key to apply it.
Audio Control
Use this option to select between the 2 modes of audio control, model or GPI
file.
Swap-Preview or Cascade Mode
To view or change the current mode of the Imagestore, select "Swap-
PVW/Cascade" from the "System Set-up" menu and press the enter key. The
"Operation Mode" display will appear showing the current setting. To return