User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 192
System Information
The system information facility allows the user to monitor the status of the
fixed settings and options of the unit, including firmware versions and DSP
codes. To access the information, select set-up from the boot-up menu before
pressing the enter key. From the set-up menu, use the arrow keys W X to
display the option system information in line two of the display and press the
enter key.
Each time the enter key is pressed the following item of status information
will be displayed. The status information is looped and repeated pressing of
the enter key will result in the same information being re-displayed. Pressing
the escape key several times will return the display to the start-up menu.
On-Screen Information (Swap Preview Mode)
It is only possible to display the unit's system information on-screen when
Imagestore is configured in Swap-Preview mode. To display the status
information on the PVW output select set-up/on-screen information from the
boot-up menu.
There are three "Status on preview" options that can be displayed on the
PVW output. The arrow keys W X are pressed to change the selection on the
second line of the display and the PVW output changes immediately without
the need to press the enter key. Pressing either the enter or escape key will
cancel the PVW status display and return the VFD display to the earlier
menu.