User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 191
HOSTNAME sets up the machine’s host name – this name is
displayed on the root menu of the Oxtel RCP
panel and on the front-panel scrolling screen (note
that this command is not currently used for
Ethernet naming)
GATEWAY set the machines gateway address,
default= 0 0 0 0
LICENCE* installs a licence code provided by Miranda
Technologies Ltd (a four-character ID such as
ENET)
LICENCE_CLR clears an installed licence code off the machine
MPEG_IP MPEG IP address for IS3 systems only
PASS_CAPTIONS
PASS_CAPTIONS: ON
PASS_CAPTIONS: OFF enables support for line 21 close captions
* A valid licence code can only be obtained from Miranda Technologies Ltd.
What are licence codes?
Licence codes are issued by Miranda Technologies Ltd to enable you to use
various software options. You can look at any installed licences using the on-
screen information (see System Information/On-Screen Information in the
user manual). Licence codes are held on the main system PCB and are
typically linked to a specific machine serial number.
Example SYSCODES.TXT file
The following example of a SYSCODES.TXT file sets the IP, submask and
hostname and then installs a licence code:
IP_ADDRESS: 179.1.2.3
SUBMASK: 255.255.255.0
HOSTNAME: Logo_1
LICENCE: ASD4-EFGT-54YP-ZZQV-L9UW