User manual

Installation and Integration Imagestore User Manual
Page 188 Miranda Technologies Ltd
Show Fader Status
The status screen shows either the 8 video or 8 audio faders. As each fader is
adjusted the amount of deflection (0 – full-scale) will be displayed on the
front panel.
File Facilities
The file facility enables the saving of Imagestore's configuration to both a
floppy disk and the unit's hard disk. The process saves all the GPI
assignments, the fader enable/disables, the mode setting and system
configuration and can be used to re-instate the settings or copy them to other
Imagestores. Files created by a diagnostic save are sometimes requested by
the Miranda Technologies Ltd Customer Support staff to aid in resolving
customer queries.
Configuration Save
This procedure requires a DOS formatted, 3½" floppy disk. Label the disk
"Imagestore Configuration" and add the unit's serial number and location of
the unit plus the date.
This feature saves the current configuration to both the internal hard disk and
to a floppy disk that is in the front panel disk drive. Place the 3½" disk in the
front panel drive and select set-up from the start-up menu before pressing the
enter key. From the set-up menu, use the arrow keys W X to display the
option file in line two of the display and press the enter key to bring up the
file menu. Use the arrow keys W X to display the configuration save option
and press the enter key. After a few moments the display will respond with
the following message and the configuration disk will be saved.