User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 185
Fader Setup (Commands and Menus)
The following fader controls and faders are available with Imagestore. Each
fader (either physical or virtual) can control many fader controls.
Faders Enable/Disable
Up to five faders may be connected to the Imagestore SDI control port and
these are identified as "clip fader", "gain fader", "transparency fader", "image
fader", and "fade to black fader". The faders are organised into three groups
with clip, gain and transparency faders all enabled or disabled using a
common procedure. The image and FTB faders are grouped individually and
there is a separate procedure for each.
Enabling and disabling faders is achieved from the set-up menu by selecting
the faders enable option. The faders enable menu provides a choice from the
three groups by using the arrow keys W X.
Pressing the enter key, with the appropriate fader group displayed in line
two, brings up the fader menu with the enable and disable options displayed.
The current status of the fader is shown by the option enclosed in brackets.
The brackets are moved using the arrow keys W X and when the required
option is selected, pressing the enter key will apply the selection.