User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 183
Audio follow AB on
Audio follow AB off
Audio follow FTB on
Audio follow FTB off
Assigning GPI Outputs
Only GPI 1 to GPI 7 may be assigned as GPI outputs but each GPI may have
a condition assigned for GPI on and GPI off. When a GPI output assignment
is set, the setting only applies to one mode. Separate assignments may be
given to GPI's for Swap-Preview mode and for Cascade Mode. When
assignments are made, they apply to the mode selected at the time the
assignment is made.
View or Change an Output Assignment
The trigger event for a GPI output may be viewed or changed by selecting
"GPI outputs assign" from the set-up menu. Use the left and right arrow keys
W X to search through the available GPI identifiers until the required GPI is
displayed. In the example below, 'GPI 2 on' is being displayed.
To view or change the assignment, press the enter key and the current
assignment will be displayed. Where no assignment has been made, not
assigned will be displayed. With the assignment displayed, use the arrow
keys W X to display the alternative assignment options, and, if the enter key
is pressed whilst an option is being viewed, the displayed option becomes the
output assignment. Pressing escape will return the display to the earlier menu
leaving the assignment unchanged.