User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 179
List a Macro
Pressing the enter key provides access to the macro display level, and, if a
particular GPI macro is empty, Imagestore will indicate this. If a macro exists
the first command will be shown and the arrow keys W X may be used to
view any other commands in the macro.
Create a Macro
With the above menu displayed for the relevant GPI, press the enter key to
access the Edit Macro menu. This menu offers two choices, insert or delete.
To create a new macro, select and apply insert.
The Macro List Insert menu will offer the full range of valid commands
appropriate to the configured mode. Using the arrow keys W X display the
first command to be added to the macro and press enter to add it. The display
is now returned to the listing of the macro, showing the added command. To
add a second command, use the arrow keys W X to display End of List and
press the enter key as before. Further commands are added to the macro
using the same procedure.
Edit a Macro
Where a macro is already programmed, the display will indicate the first
command in the sequence and the arrow keys W X may be used to step