User manual

Installation and Integration Imagestore User Manual
Page 178 Miranda Technologies Ltd
Assigning GPI Inputs
Up to ten sequentially executed commands may be selected for each GPI
input and a series of more than one command is referred to as a macro. Up to
two macros may be associated with each GPI input, one identified as "GPI
on", the other as "GPI off". Different macro command lists are held for
Swap-Preview and Cascade modes.
To assign the GPI inputs from the front panel controls, use the arrow keys
W X to select set-up from the "boot-up" menu and press the enter key to
apply the selection. Using the arrow keys W X, select GPI input assign from
the set up menu and press the enter key to proceed.
Create or Edit an Input Macro
From the GPI Input Assign menu, use the arrow keys W X to select which
GPI input options is to be created or edited. In the following example GPI 2
on has been used to describe a process that is identical for the other seventeen
GPI input options.