User manual

Imagestore User Manual Installation and Integration
Miranda Technologies Ltd Page 175
Preview Clip: 31
Preview Gain: 32
Preview Transp: 33
PVW Anim Pos: 34
PRG Anim Pos: 35
delay 0 fields {0<->999} allows timing delays to be added in GPI macros
(note that when a delay is in progress, no other
GPI inputs will be serviced – you should therefore
take care when using delays and avoid long
delays)
force bypass bypasses the Imagestore SDI video processing
using the mechanical bypass relay (if it is fitted)
remove bypass removes the bypass set using force bypass (see
above)
[Fade rates]
Note that the options available in the Fade rates sub menu depend on
whether you are in Swap Preview mode or Cascade mode.
The following options are available in Swap Preview mode:
fade rate {0<->999} set the FG keyer fade rate to nnn frames
FTB rate {0<->999} set the FG keyer fade to black rate to nnn frames
The following options are available in Cascade mode:
MG fade rate 0<->999 set the MG keyer fade rate to nnn frames
MG FTB rate 0<->999 set the MG fade to black rate to nnn frames
FG fade rate 0<->999 set the FG keyer fade rate to nnn frames
FG FTB rate 0<->999 set the FG keyer fade to black rate to nnn frames
Fade rate 0<->999
FTB rate 0<->999 set the FTB rate to nnn frames
[EAS]
The EAS sub menu is only available if the EAS licence is installed.
EAS On
EAS Off