User manual

Installation and Integration Imagestore User Manual
Page 166 Miranda Technologies Ltd
GPI Setup (Commands and Macros)
The nine GPI ports are identified as GPI 1 through GPI 9. The first seven
ports, GPI one through seven, may be configured as either an input port or an
output port while the remaining two, GPI 8 and GPI 9 may only be
configured as inputs. Any GPI, assigned to input, may have a "macro"
associated with it that contains up to ten valid commands. When triggered the
commands within the macro execute sequentially. When assigned as an
output, a GPI may have a single status associated with it.
The GPI menu is sub divided to make it easier for you to select the
appropriate input (see GPI Inputs Assign) output (see GPI Outputs Assign)
and to view the status.
GPI Inputs Assign
The GPI input menu and the options available from each sub menu are
included in the following sections. Note that sub-menu titles are enclosed in
square brackets.
[AB Mixer]
The AB Mixer sub menu is only available when AB Mix is fitted.
cut A
cut B
toggle cut A/B
fade A
fade B
toggle fade A/B
set mix rate 0<->999
set mix type {X-fade/V-fade/Wipe L to R/Wipe R to L/Wipe T
to B/Wipe B to T}