User manual

Installation and Integration Imagestore User Manual
Page 162 Miranda Technologies Ltd
Pin RS232
2 Rx
3 Tx
5 GND
1, 4, 6 - 9 Not Used
RS422
Serial automation can be achieved using the RS422 serial interface. This port
conforms to the pin format shown in the following table.
Pin RS422
1 Tx -
2 Tx +
3 Rx +
4 Rx -
5 GND
6- 9 Not Used
SDI Control Port
The SDI Control Port is used to connect external faders, GPI's and linear time
code. A full listing of the pin format for this connection is shown in the
following table.