User manual

Imagestore User Manual EAS
Miranda Technologies Ltd Page 149
Emergency Alert System
Imagestore supports the Emergency Alert System providing the relevant
EAS1 licence is installed.
The Imagestore monitors its RS232 port for a serial string received from an
EAS receiver. When a message is received its priority is established and the
text is written and stored into one of the following default Easytext crawl
templates:
Priority 1 EASHigh.oxa
Priority 2 EASMed.oxa
Priority 3 EASLow.oxa
No priority EASNone.oxa
Note: The EAS message can only be displayed via a GPI or automation
command. To set the relevant GPI refer to page 186 and for
automation commands refer to the Oxtel Series Automation Protocol
manual.
EAS Receivers
The supported EAS receivers are:
• Sage ENDEC Model 1822.
• TFT EAS 911
To select an EAS model use the:
Set-up, System, Serial Comms Setup, RS232 Protocol, menu path.
Use the arrow keys W X to select the required unit then press enter. The
system will need restarting.