User manual

Imagestore User Manual Easysound Audio
Miranda Technologies Ltd Page 137
Analogue faders
Imagestore includes eight analogue fader inputs on the video GPI connector
each of which you can adjust, invert or pickup independently. Previously
each input was dedicated to a particular function but there are now many
more functions each of which can be controlled from analogue fader inputs.
The faders can be assigned to control specific functions from the IS2 front
panel menu (go to Set up/Fader Setup/Fader Enable).
See Analogue Faders for a complete list of all the fader controls which are
available with the Easysound new audio model:
From the Faders Set Up menu press the left and right arrow buttons to choose
the functions you want to control from fader inputs. The top line of the
display shows which fader input (if any) currently controls the function. For
example:
To assign a fader input to control the function, simply press enter.
You can now press the left and right arrow keys to choose a fader to control
this function.
In addition to the physical fader inputs (shown as Aud_ADC1 to
Aud_ADC8) you can also control the state of the internal system parameters
using various pseudo faders such as keyer and FTB levels. This enables