User manual

Easysound Audio Imagestore User Manual
Page 136 Miranda Technologies Ltd
GPI File mode
To select GPI File mode go to setup/system/Audio Control from the boot-up
menu then press the enter key. Use the arrow keys to select W X GPI File
mode then press enter.
To accommodate the new AB Mixer option, the front-panel GPI input assign
menu has been modified (go to Set up/GPI Input Assign). Each menu now
includes a sub list of GPI actions. Note that sub list entries are enclosed in
square brackets.
To display a sub list, press enter and then use the left and right arrow keys to
scroll through the list of entries. To select an entry, press enter. To go back to
the top-level list, press escape.
Note that the GPI output assign menu does not include sub lists (go to Set
up/GPI O/P Assign).
You can perform various actions using GPIs. For further information about
the GPI configurations see Input to GPI in this manual.
GPI inputs
See GPI Setup (Commands and Macros) for a complete list of all the GPI
input commands, which are available from the Audio sub menu:
GPI outputs
See GPI Setup (Commands and Macros) for a complete list of all the GPI
output commands, which are available from the GPI Output Assign menu: