User manual

Easysound Audio Imagestore User Manual
Page 132 Miranda Technologies Ltd
I/P
When you choose the I/P option, the following input options are displayed:
A
B
VO1
When you choose any of the above inputs you can adjust the level of the
input or mute the input. For example, if you choose input A, you can:
♦ choose Level to adjust the levels of pair 1, pair 2 or the whole group (you
use the rotary controls above the appropriate pair or group on the LCD
display to adjust the level)
♦ choose Mute to mute pair 1, pair 2 or the whole group (press the
appropriate soft key immediately under the pair or group on the LCD
display)
You adjust the level and mute the inputs for the B and VO1 inputs in exactly
the same way.
A/B
When you choose the A/B option the following options are displayed:
Cut A
Cut B
Fade A
Fade B
To cut to A or cut to B, press the appropriate soft key (the key immediately
under the option on the LCD display).
To fade to A or fade to B, press the appropriate soft key to choose Fade A or
Fade B and then adjust the fade using the rate key (to change between slow,
medium and fast (note that this menu is not accessible if the A/B audio
follow video mode is set).