User manual

Imagestore User Manual Easysound Audio
Miranda Technologies Ltd Page 129
Programme Pair 2
Transition Point 0 < 50 > 100%. Sets the point at which the AES
data is cut relative the video AB cut
0 = start of transition
50 =mid transition (factory default)
100 = end of transition
Front Panel Control
To access the front panel audio control menus select Manual/operate/audio
then press the enter key.
Using the arrow keys W and X and the enter key select Programme or
Preview then select from the following options:
Programme
Cut to A
Cut to B
Fade to A
Fade to B
Fade to Silence
Fade from Silence
Fade Up VO VO One Pair 1
VO One Pair 2
Fade Down VO VO One Pair 1
VO One Pair 2
Easplay Load Foregnd Clip (select file)
Play Foregnd Clip
Stop Foregnd Clip
Load Midgnd Clip (select file)
Play Midgnd Clip