User manual

Easysound Audio Imagestore User Manual
Page 122 Miranda Technologies Ltd
The above display can be shown for each channel
(1 to 4) for each of the three group inputs.
Mute mute enables you to mute pairs or groups
choose Pair 1 or Pair 2, press enter and then
choose Mute On or Mute Off
Trim trim enables you to boost or attenuate individual
pairs in a range from –6dB to + 6dB (this is
particularly useful for quiet audio sources (note
that the adjustment of the input level occurs after
the trim))
choose Pair 1 or Pair 2, press enter and then
set/adjust the input trim using < and >
Phase phase enables you to invert the phase of pairs or
groups
choose Pair 1 or Pair 2, press enter and then
choose normal or inverted
Level level enables you to adjust the input level for pairs
or groups in a range from –100dB to +28dB
choose Pair 1 or Pair 2, press enter and then
set/adjust the level using W and X keys
Input Source input source enables you to choose the incoming
audio from the AES streams or the audio
embedded with the video input (choose group 1, 2,
3 or 4 or AES)
VO1 Input/VO2 Input
You use the VO1 Input and VO2 Input menu to specify the following settings
(note that VO2 Input is not available in AB Mix and VO mode):