User manual

Squeezy DVE Imagestore User Manual
Page110 Miranda Technologies Ltd
RATE pressing this button enables you to change the
squeeze rates (slow, medium or fast) – note that
these rates only apply to the Oxtel RCP
SETUP the squeeze mode can be changed by selecting
SQZ.MODE from the setup menu
CUT FADE pressing this button enables you to specify
whether the selected preset is moved or cut
Imagestore front panel
You can control Squeezy from the front-panel Squeezy menu (go to
Manual/Operate/Squeezy.
The options on the Squeezy menu enable you to:
♦ select presets
♦ edit presets
♦ change squeeze mode
♦ perform DVE moves
For example:
Squeeze option Used to
do squeeze toggle between the currently selected DVE preset and the
full screen
clear squeeze return to the full screen
select preset select a numbered preset (as each preset is displayed the
DVE jumps to show the effect (note that this is not
suitable for use on air)
squeeze mode select the appropriate squeeze mode (note that the modes
available to you will depend on how your version of
Imagestore is configured and whether you are in swap-
preview or cascade mode)
squeeze rate set a rate in fields for subsequent squeeze effects (note
that you can also set a rate using a GPI) – note that the